HOLLYLAND LARK M2 WIRELESS LAVALIER MICRPHONE

• [INCREDIBLY SMALL] Weighing just 9g, LARK M2 wireless lavalier microphone is the lightest mini microphone on the market. With its lossless sound reproduction and top-of-the-line recording capabilities, it brings you unmatched recording performance. The wireless audio transmission can reach up to 1,000ft line-of-sight range. Perfect for filmmakers, vloggers, and podcasters.
• [Hi-Fi Studio-Grade Sound Quality] Designed for the Pro, LARK M2 microphone features a 48kHz/24bit audio format, capturing every sound with accuracy. With a 70dB signal-to-noise ratio, it ensures excellent audio signals with minimal background noise. Moreover, it can handle a Maximum 115dB Sound Pressure Level, perfect for recording in environments with high-pitched sounds.
• [Extended 40-Hour Battery Life] With optimized power efficiency, the LARK M2 wireless microphone can work for up to 10 hours (with ENC off). The compact charging case can fully charge the entire set twice, and each charge takes less than 2 hours. With the charging case, the camera version has a battery life of 40 hours. No more worrying about low battery situation.
• [Smart Control of Noise Cancellation] LARK M2 supports one-click on the yellow button to turn on/off the noise cancellation on the transmitter. On the receiver of the camera version, the indicator lights at the top of the RX will stay green when noise cancellation is on. Enhanced firmware and audio algorithms ensure crystal-clear, rich, and undistorted human voices, even in noisy environments.
• [Smooth Switch Between Mono & Stereo] The Lark M2 receiver of the camera version supports two recording modes: mono and stereo. You can switch between them by pressing the Mode Switching & Pairing button on the receiver. Note: The receiver supports switching between mono and stereo modes only when connected to the camera through the 3.5mm audio jack.
• [Instant Pairing Upon Unboxing] LARK M2 microphone system is pre-paired at the factory, so you won"t have to deal with any complex setup procedures. The TX and RX will automatically pair with each other, allowing you to start recording right away. You can easily adjust volume levels on the RX using the intuitive knob. Three LEDs clearly display volume levels, showing the current status.
• [300m Stable Transmission, Support UAC] LARK M2 is equipped with a superior high-gain LDS antenna that eliminates interference caused by the human body, providing a stable and uninterrupted audio transmission of up to 1000ft/300m LOS range. With its UAC function, you can connect the RX to your computer directly, eliminating the need for an external sound card.

VIDEO LINK:

https://youtu.be/PiBde5ia-v8

Note:

• The camera version has a battery life of 40 hours, while the mobile version has a battery life of 30 hours with the charging case.
• Mobile Version: Wireless transmission can reach up to 1000ft (300m) for line-of-sight (LOS) and 197ft (60m) for non-LOS (NLOS).Camera Version: Wireless transmission can reach up to 1000ft (300m) for line-of-sight (LOS) and 131ft (40m) for non-LOS (NLOS).
• Playback without the need to unplug function is not supported when connecting the camera version RX to a camera.
• TX Control Video Recording function is only possible with phones that allow starting and ending video recording or taking photos with a single volume button press.
• Simply unbox the package, remove the insulating film, and place it back in the charging case, TX and RX will automatically pair, and you can begin recording without any delays.
• The camera version RX only supports switching between mono and stereo modes when the 3.5mm audio jack is connected to a camera.

SPECIFICATIONS:

• Mic Sensitivity

  -37 dBV ± 2dB @ 1 KHz, 94dB SPL

• Wireless Modulation Mode

  GFSK 2 Mbps

• Wireless Transmission

  2.4 GHz Adaptive Frequency Hopping (AFH)

• Transmission Range

  Mobile Version: Up to 1000ft (300m) for LOS/200ft (60m) for NLOS
  Camera Version: Up to 1000ft (300m) for LOS/130ft (40m) for NLOS

• Mic Polar Pattern

  Omnidirectional

• Frequency Response

  20 Hz–20 kHz

• Signal-to-Noise Ratio

  > 70dB

• Sound Pressure Level

  115dB SPL

• Bit Depth

  24-bit

• Sample Rate

  48 kHz

• Battery Voltage

  TX: 3.87V
  Camera Version RX: 3.87V
  Mobile Version Charging Case: 3.8V
  Camera Version Charging Case: 3.8V

• Battery Capacity

  TX: 97 mAh
  Camera Version RX: 145 mAh
  Mobile Version Charging Case: 750 mAh
  Camera Version Charging Case: 1950 mAh

• Operating Time

  TX: About 10 hours
  Camera Version RX: About 9 hours
  Mobile Version Charging Case: > 2 times charging for 2 TX at the same time
  Camera Version Charging Case: > 3 times charging for all TX and RX at the same time

• Charging Time

  TX: About 1.5 hours
  Camera Version RX: About 1.5 hours
  Mobile Version Charging Case: < 1.5 hours
  Camera Version Charging Case: < 2 hours

• Charging Temperature

  0° C to 45° C

• Operating Temperature

  –10° C to 45° C

• Dimensions

  TX: Approx. D26mm x 9.9mm (1.0” x 0.4”)
  Mobile Version RX: Approx. 40mm x 16.5mm x 9mm (1.6” x 0.6” x 0.4”)
  Camera Version RX: Approx. 40mm x 25.7mm x 20.5mm (1.6” x 1.0” x 0.8”)
  Mobile Version Charging Case: Approx. 75.8mm x 49.8mm x 35mm (3.0” x 2.0” x 1.4”)
  Camera Version Charging Case: Approx. 86mm x 54mm x 39mm (3.4” x 2.1” x 1.5”)

• Weight

  TX: Approx. 9g (0.3oz)
  Mobile Version RX: Approx. 6g (0.2oz)
  Camera Version RX: Approx. 14.8g (0.5oz)
  Mobile Version Charging Case: Approx. 65.6g (2.3oz)
  Camera Version Charging Case: Approx. 111g (3.9oz)